EJ1600-V2
| Form Factor | 3U rackmount |
| Host Interface | Three SAS (one input, one output, one reserved) 12Gbps for each controller, 4x port |
| LED Indicators | System Power LED (Green): on/off System Status (Green/ Orange): in operation, system errors, low power, degraded RAID mode, memory failure, fan/power supply failure, system/disk temperature too high, storage pool reaching threshold value, system performing take-over, power supply unit unplugged LCD Status Display (Two-digit number): Status of JBOD connection |
| Buttons | Power / Reset |
| Dimensions (HxWxD) | 132 × 446.2 × 618 mm |
| Weight (Net) | 24.11 kg |
| Weight (Gross) | 33.76 kg |
| Max. number of HDDs/SSDs supported | 16 |
| Hard Drive Type | 3.5″ SAS12/6Gb/s, hard drive or 2.5″ SAS SSD |
| Operating Temperature | 0 – 40 °C (32°F – 104°F) |
| Storage Temperature | -20 – 70°C (-4°F – 158°F) |
| Relative Humidity | 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
| Power Supply Unit | Redundant/ Hot Swap ATX Power Supply, 450W, 90-240Vac~, 50-60Hz |
| Power Consumption: Operating Mode, Typical | 344.19 W
Tested with drives fully populated.
|
| Fan | Hot-swappable fan module (60*60*38mm; 16000RPM/12v/2.8A x 3) |
| System Warning | Buzzer |
| Management | The functions listed below are managed via the QNAP QES operating system.
Support for hard disk’s S.M.A.R.T. capacity Upto 1PB Single Volume |
EJ1600-V2
https://www.qnap.com/en/product/ej1600%20v2/specs/hardware/
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.